CARACTERISTICI:

◎ 500 lumens maximum output and 90 meters maximum beam distance.

◎ Two white light LEDs and one red light LED, with a lifespan of 50,000 hours.

◎ White/red light sources.

◎ Switch built-in green/red breathing light.

◎ USB Type-C charging port.

◎ Recessed switch and lockout function.

◎ Battery level indication and low-voltage warning.

◎ Intelligent overheat protection against high surface temperature.

◎ All-metal CNC machining light body.

◎ Premium type HAIII hard-anodized anti-abrasive finish.

Autonomie:

◎ High - 500 Lumeni (1 oră și 20 minute)

◎ Med - 150 Lumeni (2 ore)

◎ Low - 30 Lumeni (6 ore și 35 minute)

◎ Eco - 5 Lumeni (30 ore)

Notă: Specificațiile de mai sus au fost obținute de Fenix prin testarea folosind acumlatorul inclus Li-Po 400 mAh, în laboratoarele proprii la temperatura de 21 ± 3° C și umiditatea de 50% - 80%.

Performanțele acestui produs pot varia în funcție de diferitele medii de lucru.

*Puterea maximă este măsurată prin acumularea timpilor de funcționare, inclusiv la niveluri reduse, datorate funcției de protecție din proiectare împotriva supra-încălzirii.

Instrucțiuni de operare:

On/off

Press and hold the switch for 0.5 seconds to turn on/off the light.

Press and hold the switch for 1.2 seconds to turn on the red light.

With the light switched off and unlocked, double click the switch to turn on the breathing light, press and hold for 0.5 seconds to turn off.

Output Selection

In white light mode: single click the switch to cycle through Eco→Low→Med→High.

In red light mode: single click the switch to cycle through Red→Red Flash.

With the breathing light turned on, single click the switch to cycle through Red→Green→Red&Green in turn.

Intelligent Memory Circuit

The light memorizes the last selected output in white light mode. When turned on again the previously used output of white light mode will be recalled. 

Lock/Unlock

Lock: with the light switched off, press and hold the switch for 3 seconds to lock the light, the light will blink twice on Eco to indicate locked status.

Unlock: with the light locked, press and hold the switch for 3 seconds, the light will be unlocked and activated on Eco.

In locked status, single clicking will activate battery level indication, and other operations except long pressing will activate 2 blinks on Eco to indicate locked status.

Charging 

1. First switch off the light and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light. 

2. The indicator will display red while charging, and will turn green when fully charged. 

3. Once charging is completed, be sure to close the anti-dust cover for normal use.

4. Eco and Red modes are available while charging.

Condiție de utilizare: 
Lanternele Fenix trebuiesc alimentate doar cu baterii sau acumulatori Fenix sau alte branduri de calitate superioară (ex: Panasonic, Samsung, Sony, Sanyo). Utilizarea de baterii sau acumulatori de calitate inferioară sau îndoielnică, duce la pierderea garanției (ex: UltraFirc, Castinoo, Boruit, Eilong, Gif, etc).

Battery Level Indication: 

With the light switched off, single click the switch to check the battery level and it will last for 3 seconds. 

Green light on: saturated 100% - 85%

Green light flashes: sufficient 85% - 50%

Red light on: poor 50% - 25% 

Red light flashes: critical 25% - 1%

Intelligent Overheat Protection:

The light will accumulate a lot of heat when used on High mode for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user the reselection of High mode. 

Low-voltage Warning:

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco mode is reached. When this happens in Eco mode, the battery level indicator blinks 3 times every 10 minutes to remind you to timely recharge the battery. 

Usage and Maintenance:

 Fully charge the light in time to ensure normal use next time. 

 Recharge a stored light every four months to maintain the optimum performance of the battery.

 Once charging is completed, be sure to close the anti-dust cover to maintain the dustproof and waterproof ability.

Condiție de utilizare: 
Lanternele Fenix trebuiesc alimentate doar cu baterii sau acumulatori Fenix sau alte branduri de calitate superioară (ex: Panasonic, Samsung, Sony, Sanyo). Utilizarea de baterii sau
acumulatori de calitate inferioară sau îndoielnică, duce la pierderea garanției (ex: UltraFirc, Castinoo, Boruit, Eilong, Gif, etc).

Pachetul conține:

■ Lanternă E03R V2.0

■ Cablu de reâncărcare USB Type-C

■ Inel de atașare

■ Manual de instrucțiuni

■ Card de garanție

MANUALUL UTILIZATORULUI                                        PREZENTARE